CTE PIANOPLAN 600 J SPEEDY STANDARD, Operator'S Maintenance Manual, Page: 24 / 62

Operator’s and Maintenance Manual
Pianoplan 600J Speedy Standard
CODE
504196
24
5.5. Use of the loading platform
In order to have maximum stability when you transport a load, it is necessary that the centre
of gravity of the load is as close as possible in the middle of the machine.
To obtain these conditions, you must operate as follow:
•
Gently press the control button for the roller lifting system (Fig. 4.2 Pos. 13) , lifting the
Pianoplan a few centimetres off the floor;
•
In case of load imbalance, press with short pulses the button placed on the steering bar
(Fig. 4.2 Pos. 12) “ahead” if the load weights on the back position of the Pianoplan,
"back" if the load weights on the front part, until you obtain the balancing of the load.
This facility gives you the possibility to maximise the inherent manoeuvrability of
the Pianoplan
.
ATTENTION : if the load is found unstable when lifting the “machine”, and the
operator wishes to move the unit on its rollers, it is necessary to re-position the load.
YES