RV50 Sierra Wireless AirLink® 4G LTE Cellular Modem
5
4.
Connect the power cable leads to a power supply.
Lead Color
Function
Connect To
Black
Ground
G
White
Enable (On/Off)
12V
or
SW12V
or control port
Red
Power (7 to 36 V)
12V
5.
Connect the power cable to the RV50
DC Power
input. When the RV50 is
properly set up and powered, the status LEDs will turn on. The RV50 will
begin the activation/provisioning process and attempt to connect to the
mobile network. This process typically takes 5 to 10 minutes. A successful
connection is indicated by a solid green or solid amber
Network
LED. If
the RV50 does not automatically connect to the network, you may need to
proceed to Step 6 to confirm or enter your
WAN/Cellular | SIM Slot 1
Configuration | Network Credentials | User Entered APN
information.
6.
Connect your Windows® computer to the RV50 using the supplied
Ethernet cable.
7.
Launch an Internet Explorer or Firefox web browser, and enter
http://192.168.13.31:9191 into the address bar. The
ACEmanager
login
screen should appear in your browser.
8.
Log in using
User Name
= user and
Password
= 12345.
8.
Once logged in, check the
Status | Home | Network State
field. It should
read
Network Ready
, indicating the RV50 is connected to the cellular
network. You can easily test the RV50 connection to the Internet by
selecting the
Admin | Advanced
tab and using the
PING
tool to ping an
Internet server, such as
www.campbellsci.com
.
Summary of Contents for RV50
