CS RV50, Instruction Manual

Page: 45 / 50

E-1
Appendix E. Regulatory Information
This information provided by Sierra Wireless®.
E.1 Important Information for North American Users
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the
interference at his own expense.
Changes or modifications to this device not expressly
approved by Sierra Wireless could void the user’s
authority to operate this equipment.
E.2 RF Exposure
In accordance with FCC/IC requirements of human exposure to radio
frequency fields, the radiating element shall be installed such that a minimum
separation distance of 20 cm should be maintained from the antenna and the
user’s body.
This product is only to be installed by qualified
personnel.
To comply with FCC/IC regulations limiting both maximum RF output power
and human exposure to RF radiation, the maximum antenna gain must not
exceed the specifications listed below for the device used.
Device Frequency Band
FCC ID/IC Number
N7NMC7355 2417C-MC7355
AirLink RV50
Cellular Band 6.5 dBi
PCS Band 3.0 dBi
Band 4 6.0 dBi
Band 13 9.0 dBi
Band 17 9.0 dBi
Band 25 3.0 dBi
NOTE
WARNNG
WARNING