RV50 Sierra Wireless AirLink® 4G LTE Cellular Modem
18
7.5 ACEmanager and Template Files
Section
4
,
QuickStart
(p. 2)
, describes how to set up the RV50 in serial server
mode using
ACEmanager
.
ACEmanager
along with template files can be used
to set up the RV50 in serial server mode or PPP.
ACEmanager
is accessed via a web browser. For initial setup or
troubleshooting with a direct (cabled) connection, connect a standard Ethernet
(RJ45) cable between the Ethernet port on the PC and that on the modem. Type
http://192.168.13.31:9191
into a web browser.
Once the modem is provisioned on the network, it may be accessed over the air
by typing
http://
followed by the IP address (dynamic or static) of the modem,
followed by the port
:9191
.
The first screen is a login (shown below). The default password is 12345 and it
is strongly recommended to leave it as the default. If security is of concern,
contact a Campbell Scientific application engineer to discuss options.
After entering the password and pressing enter (or clicking
Log In
), the
following status screen is displayed:
Summary of Contents for RV50
