CS RV50, Instruction Manual

Page: 11 / 50

RV50 Sierra Wireless AirLink® 4G LTE Cellular Modem
3
4.1.2 AT&T
What you need:
•
AT&T GSM/GPRS/EDGE/HSPA+/LTE coverage at the datalogger site.
For a coverage map refer to:
www.att.com/maps/wireless-coverage.html .
•
GSM/GPRS/EDGE/HSPA+/LTE business account established with
AT&T
To set up a GSM/GPRS/EDGE/HSPA+/LTE business account, contact your
AT&T Business Account Representative or Blu-Telecommunications.
Blu-Telecommunications is part of the Alliance Channel with AT&T and can
assist any customer nationwide. Blu-Telecommunications will contact AT&T
and work with an AT&T account manager to set up an account.
Contact information for Blu-Telecommunication:
Website: www.blu-tel.com
Phone number: (877) 422-2616, or Email box: i2gold@blu-tel.com
What to ask for: M2M Setup
Who to ask for: Carlos Morales or Andy Tran
An APN must be added onto the account to make the modem accessible
through the Internet. For networks with fewer than 30 modems, the standard
‘I2Gold APN’ can be used; networks with more than 30 modems will require a
‘Custom APN’. A Custom APN has a setup fee starting at $500 and takes a
minimum of 7 to 14 business days to complete. The user must program the
APN name into the modem as described in Section
4.3 , Configure RV50
(p. 4)
.
AT&T will provide a Subscriber Identity Module (SIM) card for each modem.
The mini-SIM (2FF) card must be installed inside of the modem as described
in Section
4.2 , Install the SIM Card
(p. 3)
. In addition to the SIM card, you
should receive:
•
10-digit MSISDN number (telephone number associated with the
SIM, used for billing)
•
IP Address and APN for GSM/GPRS/EDGE/HSPA+/LTE service
4.2 Install the SIM Card
The SIM in the RV50 is a smartcard that securely stores the key identifying a
mobile subscriber. You will only need to install the SIM once in the life of the
modem.
To install the mini-SIM (2FF) card:
1. Remove the SIM card cover.
2. By default, the upper slot is the primary SIM. Note the location of the
notched corner for correct alignment. The gold contact points of the SIM
face down when inserting into the upper slot as shown in FIGURE
4-1 .
(They face up when inserting into the lower slot.) Gently slide the card