0
Motor commands:
-.button.:.
turns.the.antenna.to.the.east
+.button:.
turns.the.antenna.to.the.west
OK.button:. stops.the.motor
1.button:.
sets.the.eastern.limit.for.the.antenna
2.button:.
sets.the.western.limit.for.the.antenna
3.button:.
deletes.the.antenna.limits
4.button:.
turns.to.the.set.antenna.position
5 button:
fine adjustment of the motor in an eastward direction
6 button:
fine adjustment of the motor in a westward direction
7.button:.
recalculates.the.antenna.position
8.button:.
stores.the.current.antenna.position.under.the.name.of.the.chosen.satellite
Red.button:. starts.the.channel.search
Basic settings for the rotor system:
First. install. the. motor. and. the. antenna. according. to. the. manufacturer’s. instructions.. In. the. menu.
Settings
.–.
Installation
.–.
LNB configuration,
.DiSEqC.mode.must.be.set.to.DiSEqC.1.2..Once.this.is.
done,.the.eastern.and.western.rotation.limits.must.be.set.in.the.
Motor settings
.menu..It.is.important.
that. the. dish. and. the. LNB. do. not. collide. with. obstructions. such. as. a. wall. or. roof.. If. there. are. no.
obstructions.within.the.entire.turning.radius.of.the.antenna,.set.the.limits.such.that.the.antenna.can.be.
turned.slightly.past.the.positions.where.the.outermost.satellites.can.be.received..Once.the.selections.
have.been.made.in.the.menu.lines.1).to.5),.the.motor.can.be.rotated.to.the.east.or.west.until.a.picture.
appears.on.the.connected.TV.set.or.the.signal.level.display.indicates.that.a.signal.is.being.received..
Optimum antenna orientation is achieved by fine adjustment. Once the antenna is correctly set up, the
antenna.position.will.be.stored.and.the.procedure.repeated.for.further.satellites..
Channel list
You.can.arrange.the.order.of.the.pre-programmed.channels.according.to.your.own.wishes.and.delete.
channels.you.don’t.need..This.applies.to.both.TV.channels.and.radio.stations.
In.the.main.menu,.use.the
CH
s t
.buttons.to.move.the.cursor.to.the.line.
Channel list
.and.press.the.
OK
.button..The.following.menu.will.appear:
Channel list – sort manually
Allows.you.to.delete.or.move.channels.within.the.channel.list..In.the.menu.
Channel list
.use.the
CH
s
t
.buttons.to.move.the.cursor.to.the.line.
Sort manually
.and.press.the.
OK
.button..
a) Deleting channels
Select.the.channel.to.be.deleted.with.
CH
s t
.and.highlight.it.with.
OK.
.You.can.now.select.
further.channels.with.
CH
s t
.and.highlight.them.with.
OK
..To.delete.the.highlighted.channels.
press.the.
AV
.button..
b) Sorting channels
Select.the.channel.to.be.moved.with.
CH
s t
.and.highlight.it.with.
OK
..You.can.now.select.further.
channels.with.
CH
s t
.and.highlight.them.with.
OK
..With.
CH
s t
.select.the.channel.slot.before.
which.the.highlighted.channels.are.to.be.inserted..To.move.the.channels,.press.the.
yellow
.button..
