Settings – Subtitles
1) Subtitles
.
You.can.use.the.
VOL
◀ ▶
buttons.to.switch.subtitles.on.or.off..
2) Subtitle language
.
You.can.use.the.
VOL
◀ ▶
buttons.to.select.the.language.of.the.subtitles..If.no.subtitles.are.being.
transmitted,..the.symbol.„-“.will.be.displayed.
Press.
EXIT
.to.leave.the.menu..Use.the.
VOL
◀ ▶
.buttons.to.choose.whether.you.want.to.store.the.
changes.made.(
Yes
).or.keep.the.previous.settings.(
No
). Confirm your choice with the
OK
.button.
Installation
This digital receiver was pre-configured in the factory so that it is ready to work right away with
most satellite systems and LNB configurations without having to make any changes to settings. Any
changes.made.in.this.menu.have.a.direct.effect.on.the.reception.characteristics.of.the.receiver.and.
should therefore only be carried out by qualified personnel! In the main menu use
CH
st
.to.select.
the.line.
Installation
and confirm with
OK
..The.following.menu.will.appear:
The.line.
Motor settings
.will.not.be.displayed.if.DiSEqC.1.0.has.been.set.in.the.
LNB configuration
.
menu.
Use.the.
CH
st
to make a selection and confirm this with
OK
.
Installation – LNB configuration
Select.the.required.line.with.
CH
st
.and.make.the.desired.setting.using.
VOL
◀ ▶
or.
1-0
.
1) LNB:
Name.of.the.satellite.
2) LNB supply
You.can.use.the.
VOL
◀ ▶
buttons.to.switch.the.LNB.supply.voltage.on.or.off.
3) LOW band
LOW.band.oscillator.frequency..Can.be.set.using.the.
VOL
◀ ▶
buttons.or,.after.the.
OK
.button.has.
been.pressed,.directly.using.the.
1-0
.buttons.
4) HIGH band
HIGH.band.oscillator.frequency..Can.be.set.using.the.
VOL
◀ ▶
buttons.or,.after.the.
OK
.button.has.
been.pressed,.directly.using.the.
1-0
.buttons.
5) DiSEqC switch
If.the.receiver.is.connected.to.a.satellite.system.for.the.simultaneous.reception.of.several.satellites.
(multi-feed.system),.then.assign.the.respective.LNB.(menu.line.1).to.its.input.on.the.DiSEqC.switch.
using.the.
VOL
◀ ▶
.buttons.
