Channel search
1..
Use.the
CH
s t
.buttons.to.move.the.cursor.to.the.line.
Satellite
.and.use.the.
VOL
◀ ▶
.buttons.
to.set.the.desired.satellite.
2..
Select.the.line.
Search mode
.with.
CH
st
.and.use.the.
VOL
◀ ▶
.buttons.to.select.the.desired.
search.mode.
Transponder
:. In.this.mode,.only.one.transponder.is.searched..For.this.you.have.to.enter.the.
frequency,.polarisation.and.symbol.rate.of.the.transponder.
Satellites
:..
In.this.mode,.the.transponders.for.the.channels.stored.in.the.channel.list.will.be.
searched.for.new.channels.
3..
In.the.line.
Encrypted
.use.the.
VOL
◀ ▶
.buttons.to.select.whether.the.channel.search.should.also.
search.for.encrypted.channels.
No
..
=.encrypted.channels.will.be.ignored.
Yes
..
=.encrypted.channels.will.also.be.included.in.the.list.
The.following.settings.are.only.carried.out.in.the.search.mode.
Transponder
.
4..
Use.the.
CH
st
.buttons.to.move.the.cursor.to.the.line.
Frequency
,.press.the.
OK
.button.and.use.
the 1-0 buttons to enter the channel’s 5-digit frequency then confirm the entry with
OK
.
5..
Use. the.
CH
st
.buttons. to.move. the. cursor. to.the. line.
Polarisation
.and. use. the.
VOL
◀ ▶
.
buttons.to.set.the.polarisation.(vertical.or.horizontal).
6..
Use.the.
CH
st
.buttons.to.move.the.cursor.to.the.line.
Symbol rate
,.press.the.
OK
.button.and.
use the 1-0 buttons to enter the symbol rate then confirm the entry with
OK
.
Use.the.
CH
st
.buttons.to.move.the.cursor.to.the.line.
Start channel search
,.then.start.the.channel.
search.by.pressing.the.
OK
.button.
Two.windows.will.now.be.displayed.listing.the.newly.found.TV.channels.and.radio.stations.
In.the.“Status:”.window.you.can.see.how.far.the.search.has.progressed.
-.Display:..
Scanning
..=>.search.is.active
-.Display:..
Complete
...=>.search.has.been.completed.
When.leaving.the.menu.(
EXIT
.button).you.will.be.asked.whether.you.want.to.store.the.new.channels.
(
Yes
).or.delete.them.again.(
No
)..Make.your.selection.with.the.
VOL
◀ ▶
buttons and confirm it with
the.
OK
.button.
The.newly.found.channels.will.be.added.to.the.end.of.the.channel.list.
Installation – Factory default settings
This.menu.item.is.used.to.reset.the.receiver.to.the.factory.default.settings..Afterwards.it.will.revert.to.
the three start menus as in the first-time installation.
