6) Tone burst switch
If.the.receiver.is.connected.to.a.satellite.system.for.the.simultaneous.reception.of.several.satellites.
(multi-feed.system),.then.assign.the.respective.LNB.(menu.line.1).to.its.input.on.the.tone.burst.
switch.using.the.
VOL
◀ ▶
.buttons.
7) DiSEqC mode
You.can.use.the.
VOL
◀ ▶
buttons.to.select.the.DiSEqC.mode..Select.
DiSEqC
.
1.0
for fixed systems
and.
DiSEqC 1.2
.for.motorised.systems..If.you.select.DiSEqC.1.2,.the.line.
Motor Settings
.will.appear.
in.the.
Installation
.menu.
Press.
EXIT
.to.leave.the.menu..Use.the.
VOL
◀ ▶
.buttons.to.choose.whether.you.want.to.store.the.
changes.made.(
Yes
).or.keep.the.previous.settings.(
No
). Confirm your choice with the
OK
.button.
Installation – Channel search
This.digital.receiver.has.been.pre-programmed.at.the.factory.with.most.of.the.digital.TV.channels.and.
RADIO.stations.for.the.following.satellites
-. Astra.. .
19,2°.east,.
-. Hot.Bird..
13°.east,.
-. Türksat.1C..
42°.east,.
-. Sirius.2/3..
..5°.east,.
-. Amos.1..
..4°.west,
-. Hellas.Sat.2..
39°.east.
You.can.read.which.satellite.channels.are.already.pre-programmed.when.you.call.up.the.channel.list.
in.TV.or.RADIO.mode.using.the.
LIST
.button..
New.satellite.channels.are.constantly.being.added.and.satellite.parameters.can.change..We.therefore.
recommend.that.you.carry.out.a.channel.search.from.time.to.time.
Use.the
CH
s t
.buttons.to.move.the.cursor.in.the.
Installation
.menu.to.the.line.
Channel search
.and.
press.the.
OK
.button..The.following.menu.will.appear:
