CS DSR 520, Operating Instructions Manual

Page: 19 / 28

Installation – Motor settings
Your.digital.receiver.is.suitable.for.use.with.a.rotor.system.(DiSEqC.level.1.2)..With.the.aid.of.DiSEqC.
control.you.can.control.a.suitable.motor.via.the.existing.coaxial.cable.
In.the.menu.
LNB configuration first select DiSEqC mode 1.2. Then leave the menu with EXIT .and.use.
the CH .
ts
.buttons.to.select.. Motor settings .and.press. OK .
1) Satellite:
Use.the. VOL ◀ ▶ . buttons.to.select.a.satellite.name.in.order.to.identify.the.corresponding.antenna.
position.
2) Antenna position
Use.the. VOL
◀ ▶
. buttons to.select.the.antenna.position.to.be.transmitted.to.the.DiSEqC.motor.
3) Frequency
The. frequency. of. a. strong. transponder. to. locate. the. satellite.. Can. be. set. using. the. VOL ◀ ▶ .
buttons.or,.after.pressing.the. OK .button,.directly.using.the. 1-0 buttons.
4) Polarisation
Use.the. VOL ◀ ▶ . buttons to.select.the.polarisation.of.the.transponder.(horizontal.or.vertical).
5) Symbol rate
Enter. the. symbol. rate. of. the. transponder. with. the. VOL
◀ ▶
. buttons. or,. after. pressing. the. OK .
button,.directly.using.the. 1-0 buttons.
6) Motor setting
After.making.your.selections.in.points.1).to.5),.you.can.now.send.the.commands.for.setting.the.
motor.positions.