6
code 6118250 iss. 10-2018
Do not disconnect it by unplugging it when there is a flame on in the burner.
Do not use the unit to cook food or heat drinks.
Do not use the product as a supporting structure or as a ladder.
To prevent fires, do not hang wet clothes on the unit to dry them, drying racks can be
positioned at a safe distance.
Do not wash the product with water jets. Water may penetrate into the unit and cause
electric shocks.
If the ignition system fails, it is absolutely forbidden to use flammable materials to light the
flame.
Disconnect the electrical supply before any maintenance or cleaning.
To ensure the equipment is in perfect use and safety conditions, we recommend that it is
maintained and checked by a Service Centre authorized by the Manufacturer or Dealer at
least once a year.
Some small tongues of fire can appear on the sides of the burner, this
is normal
since the
gases in contact with the hot parts are burnt off.
A minimum natural draught of 6-8 Pa in the flue pipe must always be guaranteed to prevent
the sudden lack of voltage or adverse environmental conditions from letting smoke out into
the room, making electrical components overheat (see UNI 10683 standard).
Draught conditions unsuitable to the flue, excessive fuel humidity or high ash residue in
the combustion chamber, can cause IGNITION FAILURES THAT MUST NOT BE CONSIDERED A
FAULT IN THE PRODUCT.
In case of failed ignition, clean the crucible before trying to start the stove again.
The product warranty starts on the date when the equipment is switched on for the
first time by an authorized engineer (dealer or CAT).
Further risks
The stove has been conceived, designed and built taking all the applicable Safety
Regulations currently in force in the country of manufacture into account. Even if all
possible precautions to comply with the Regulations currently in force have been taken,
the following risks can still apply:
Risk of BURNS
in accessing the inspection and cleaning doors with the flame still on or not
completely cooled down.
Risk of ELECTRICAL SHOCK
. For a correct electrical connection as well as safe protection,
the thermo-stove must be connected to a thermal differential with a trigger threshold not
exceeding 30 mA, in compliance with the regulations in force.
Risk of HAND INJURY
during the opening and cleaning operations and/or maintenance
of the supply auger, burner and ash drawer. We recommend suitable Personal Protection
Equipment (PPE), such as gloves, is used. When disassembling some parts of the equipment
and then reassembling them, pay attention to the risk of crushing your hands.