manualshive.com logo in svg

CS THERMOS Arianna 10, Instructions Manual, Page: 40 / 52

Share
Download
CS THERMOS Arianna 10 Instructions Manual Download Page 40

40

code 6118250   iss. 10-2018

9.4 

Operation phases

DISPLAY MESSAGE

MEANING

Cleaning

Pre-ventilation phase and check of safety devices with crucible cleaning before 
fuel loading.

Loading

Switching-on phase with fuel loading into the burner and simultaneous power 
ON to resistors.

Pause

Flame wait pause

Flame wait

Waiting phase within which time ignition must take place

Flame stabil.

Stabilisation phase after flame ignition with fuel intermediate loading.

ON

Burner normal operation phase with power variation from 1 to 6.

Switching-off

Timed switching-off phase associated to fuel interruption with crucible cleaning 
and waiting for the flame to go off totally.

OFF

OFF state until heat is requested again.

Stand by

Switching-off due to the heating temperature being reached.

In case of an alarm, it is necessary to wait for the end of the switching-off phase.

Never disconnect the electrical plug during operation or while the stove is switching off.

Unplug the plug only when the display shows the message "OFF".

Summary of Contents for Arianna 10





















































Reviews:

No comments