Crystal Vision UP-DOWN-A-VF User Manual Download

Page: 9 / 70

Crystal Vision

Introduction

packets and be encoded as analogue waveforms on an SD output. UP-DOWN-ATXS-VF can

be used to convert between SMPTE 2031, OP-47 and teletext in any combination. It is also

possible to specify which line in the VANC space is used to carry SMPTE 2031 or OP-47, an

advantage given the increasingly crowded VANC space. Closed captions can also be

transported across different definitions using its CEA-708 and CEA-608 extractors and

inserters.

UP-DOWN-ATXS-VF

will look after any aspect ratio conversion requirements when up or

down converting. The

UP-DOWN-ATXS-VF

can also be used to label a signal with SMPTE

2016 data by inserting one of 16 AFD codes to allow a following down converter to output the

Standard Definition with an appropriate aspect ratio conversion.

UP-DOWN-ATXS-VF

ideal for those working in non-synchronous embedded audio

environments where the audio resamplers ensure a smooth matching of the audio and video

delay, and the guardband of any embedded Dolby E will also be correctly aligned.

A further feature is the inclusion of an 8 x 8 router in both the SD path and HD path to allow

audio stereo pairs to be shuffled within and between the four embedded audio groups.

1.6 Features by model

Features

ATX

ATXS

Up converts (SD to 720p,

SD to 1080i, SD to 1080p)

Cross converts (720p to

1080i, 720p to 1080p,

1080i to 720p, 1080i to

1080p, 1080p to 1080i,

1080p to 720p)

Down converts (720p to

SD, 1080i to SD, 1080p to

SD)

Input and output formats

(50Hz and 59.94Hz)

1080p, 720p, 1080i,

625i, 525i

1080p, 720p, 1080i, 625i,

525i

1080p, 720p, 1080i,

625i, 525i

1080p, 720p, 1080i, 625i,

525i

Maximum video outputs

(depends on rear module)

3 feeds of output 1 and

3 feeds of output 2

3 feeds of output 1 and 3

feeds of output 2

3 feeds of output 1 and

3 feeds of output 2

3 feeds of output 1 and 3

feeds of output 2

Perform 2 different

conversions at same time

Two framestore

synchronisers

UP-DOWN-VF User Manual R1.1

23 June 2017

Summary of Contents for UP-DOWN-A-VF







































































Search results

Summary of Contents for UP-DOWN-A-VF

Reviews:

Related manuals for UP-DOWN-A-VF

Brands by name

Popular brands

Crystal Vision UP-DOWN-A-VF, User Manual

Search results

Summary of Contents for UP-DOWN-A-VF

Reviews:

Related manuals for UP-DOWN-A-VF

Brands by name

Popular brands