Crystal Vision
Control and Status monitoring
5.5 Audio Settings Menu
HD router
Select audio embedding options for HD outputs.
(ATX/ATXS models only)
HD Output
Select which embedded audio inputs are to be re-embedded at
the output. Current selections are shown as green circles, pre-
selected selections (red circles) are the crosspoints to be routed
when the ‘Take’ button is pressed. The inputs shown along the
top of the matrix are, or will be, routed to the embedded output
channels shown on the left hand side (use the scroll bar at the
bottom of the matrix to view all 16 inputs). Clicking on the
intersection of the input and output will show a red circle which
will change green when the ‘Take’ control is selected. All
crosspoints can be pre-selected. The screen grab above shows
de-embedded inputs Group 1 C3,4 and Group 2 C1->4 pre-
selected to embedded channels Group 1 C1->4 and Group 2 C5,6.
Embedded inputs can be routed to several outputs if required.
Take
Switch all pre-selected crosspoints in one go.
Mute
Mute the selected audio pairs.
Embed
Select to embed the audio group.
UP-DOWN-VF User Manual R1.1
29
23 June 2017
