Crystal Vision
Control and Status monitoring
Bypass SD->HD/
Bypass HD->HD
The audio sent to an output can be set to bypass the routers
under certain selected circumstances. These conditions can be
set individually according to the output format so that if these
conditions are met, the input embedded audio will appear on the
output in the same positions as the input. If these conditions are
not met, the audio will be placed according to the router. There
are separate controls for both High Definition and Standard
Definition.
Output 1/2
On if Output 1 or 2 is HD.
SD router
Select audio embedding options for SD outputs.
(ATX/ATXS models only)
SD Output
Select which embedded audio inputs are to be re-embedded at the
output. Current selections are shown as green circles, pre-selected
selections (red circles) are the crosspoints to be routed when the
‘Take’ button is pressed. The inputs shown along the top of the
matrix are, or will be, routed to the embedded output channels
shown on the left hand side (use the scroll bar at the bottom of the
matrix to view all 16 inputs). Clicking on the intersection of the
input and output will show a red circle which will change green
when the ‘Take’ control is selected. All crosspoints can be pre-
selected. The screen grab above shows de-embedded inputs Group
1 C3,4 and Group 2 C1->4 pre-selected to embedded channels
Group 1 C1->4 and Group 2 C5,6. Embedded inputs can be routed
to several outputs if required.
Take
Switch all pre-selected crosspoints in one go.
Mute
Mute the selected audio pairs.
UP-DOWN-VF User Manual R1.1
30
23 June 2017
