Crystal Vision
Control and Status monitoring
Embed
Select to embed the audio group.
Bypass HD->SD/
Bypass SD->SD
The audio sent to an output can be set to bypass the routers under
certain selected circumstances. These conditions can be set
individually according to the output format so that if these
conditions are met, the input embedded audio will appear on the
output in the same positions as the input. If these conditions are
not met, the audio will be placed according to the router. There are
separate controls for both High Definition and Standard Definition.
Output 1/2
On if Output 1 or 2 is SD.
Audio delay
Select audio delay options.
(AS/ATXS models only)
Delay (ms)
This control is used to delay PCM audio between 0 to 120mS with
respect to the video and compensate for any small delay between
the incoming video and audio signals.
DolbyE delay
Delay Dolby E encoded signals by up to three
frames in one frame increments.
DolbyE align
Enable Dolby E alignment to ensure correct positioning of the
guardband. 'DolbyE align' mode will limit the minimum video delay
to 0.5 frames.
UP-DOWN-VF User Manual R1.1
31
23 June 2017
