Crystal Vision UP-DOWN-A-VF User Manual Download Page 59

Page: 59 / 70

Crystal Vision

Troubleshooting

9 Troubleshooting

9.1 Card edge monitoring

The green LED on the front edge of the card provides power rail monitoring. The red

LED currently has no function.

UP-DOWN-VF card edge

9.2 Basic fault finding guide

Power OK LED not illuminated:

Check that the frame PSU is functioning – refer

to the Vision 3 frame manual for detailed information.

There are no video outputs

Check that a valid SDI input is present and that any

cabling is intact. Check the optical I/O configuration.

The video output exhibits jitter:

Check that the input SDI stability is within

normal limits.

The card no longer responds to front panel control:

Check that the card is

seated correctly and that the Power OK LED is lit. Check if the control panel can

control another card in the same rack. If necessary reset the card.

Resetting the card:

If required, the card may be reset by removing the card from

the rack and then re-inserting it. It is safe to re-insert the card whilst the rack is

powered. Any previous configuration will be retained, use a factory reset to erase any

configurations stored in the card.

UP-DOWN-VF User Manual R1.1

23 June 2017

Summary of Contents for UP-DOWN-A-VF







































































Search results

Summary of Contents for UP-DOWN-A-VF

Reviews:

Related manuals for UP-DOWN-A-VF

Brands by name

Popular brands

Crystal Vision UP-DOWN-A-VF, User Manual

Search results

Summary of Contents for UP-DOWN-A-VF

Reviews:

Related manuals for UP-DOWN-A-VF

Brands by name

Popular brands