Crystal Vision TANDEM-300, User Manual

Page: 3 / 90

Crystal Vision
TANDEM-300 User Manual R1.2
2
14/02/2008
5 The active control panel 33
6 Using card edge controls 34
6.1 Introduction 34
Main menus 34
The card edge display codes 35
TANDEM-300 display examples 36
Routing 36
Option cards fitted 36
SDI signal status 36
6.2 Card edge status menus 37
General Status Only menus 37
Status/Config menus 38
Ancillary data status 39
Input and output trouble shooting status 39
6.3 Selecting default routing 40
6.4 Audio routing 41
Selecting groups 41
Selecting sources and destinations 43
Assigning delay/phase inversion and muting 43
Setting audio delays and silence detect delay 45
6.5 Setting audio gains 46
6.6 Audio monitoring 47
6.7 Enabling/disabling GPI inputs 47
6.8 Using presets 48
6.9 Data packet management settings 49
Contiguous packing 49
Blanking HANC before embedding 49
Enabling EDH functions 49
Viewing ancillary data status 50
Error handling 51
Embedding formats and vertical switching 51
6.10 Setting the stereo/dual mono status flag 52
6.11 Adjusting AES/EBU output phase 53
6.12 Assigning GPI outputs 54
Immediate alarms 54
6.13 Selecting the PLL mode 56
6.14 Operating mode 56
6.15 Miscellaneous functions 56