Crystal Vision
Statesman operation
TANDEM-300 User Manual R1.2
19
14/02/2008
4 Statesman operation
The initial view will show an explorer style view of the connected frames and modules.
Double-click on a module to display the main application control panes.
Statesman main application window
The two large control panes shown in the upper and lower halves of the window may
display different menus for the same card, or controls for different cards. Click on the
horizontal button-bar between the two panes to close the lower plane or drag the button to
vary the size of the panes.
The two panes allow dual-control display of both TANDEM-300 circuit paths or ‘sides’,
or two functions such as both embed and output routing can be shown for the same
‘side’.
Shorthand codes are used for sources and destinations at the card edge and Statesman has
been designed with this in mind
The following shorthand codes may be encountered when using Statesman:
Code
Function – (Dual SDI ip ) mode
SDI 1
SDI input ‘1’
SDI 2
SDI input ‘1’
A
de-embedder SDI 1
B
de-embedder SDI 2
C
embedder SDI 1
D
embedder SDI 2 (Not supported in TANDEM-300)
G
input option SDI 2
H
input option SDI 2
I
output option SDI 1
J
output option SDI 2
