Crystal Vision
Statesman operation
TANDEM-300 User Manual R1.2
23
14/02/2008
Selecting audio groups for embedding
Select the group required in the ‘Audio Group Out’ section to embed into or select ‘None’
to turn embedding off for the SDI output stream.
SDI1 Embedding
Carrier presence status of all four audio groups in the output SDI stream is displayed next
to four select buttons on the right of the SDI 1 and SDI 2 Status menus.
Selecting the embedding mode
The embedding format is also selected from within the SDI Status menu. Select from the
following modes:
•
SONY audio fifo min – (SONY 1) shortest processing delay
•
SONY audio fifo mid – (SONY 2) medium processing delay
•
SONY audio fifo max – (SONY 3) large processing delay
•
SONY – (SONY 4) largest processing delay
•
SMPTE audio fifo min – (SMPTE 1) shortest processing delay
•
SMPTE audio fifo mid – (SMPTE 2) medium processing delay
•
SMPTE audio fifo max – (SMPTE 3) large processing delay
•
SMPTE – (SMPTE 4) slowest and most robust processing
Embedding modes are discussed in-depth in the Data packet management chapter.
