Crystal Vision
Card edge operation
SYNNER-E 3G User Manual R1.2
29
10/09/2012
Synchroniser
override
Rotate the SCROLL/ADJ. control to show the Sync override control.
Press ENTER and rotate SCROLL/ADJ. to select.
Normal Operation, Override Sync.
Output freeze
Rotate the SCROLL/ADJ. control to show the output freeze control.
Press ENTER and rotate SCROLL/ADJ. to select.
Off, Frame, Black Matte, Blue Matte.
On loss of input
show
Rotate the SCROLL/ADJ. control to show the loss of input control.
Press ENTER and rotate SCROLL/ADJ. to select.
Last Frame, Black, Blue, Delay Then Black, Delay Then Blue.
Video timing
Press ENTER and rotate SCROLL/ADJ.
Video delay in
samples
Rotate the SCROLL/ADJ. control to show the sample delay control.
Press ENTER and rotate SCROLL/ADJ. to vary.
0-2640.
Video delay in
lines
Rotate the SCROLL/ADJ. control to show the frame delay control.
Press ENTER and rotate SCROLL/ADJ. to vary.
0-1125.
Video delay in
frames
Rotate the SCROLL/ADJ. control to show the frame delay control.
Press ENTER and rotate SCROLL/ADJ. to vary.
0,1,2.
Dolby E
compensation
delay
Rotate the SCROLL/ADJ. control to show the Dolby E compensation
control.
Press ENTER and rotate SCROLL/ADJ. to vary.
0.0 – 0.5.
Video Gains
Press ENTER and rotate SCROLL/ADJ
Overall Gain
Rotate the
SCROLL/ADJ
. control to show the overall gain control.
Press ENTER and rotate SCROLL/ADJ. to vary.
0.0% – +200.0%.
Y Gain
Rotate the SCROLL/ADJ. control to show the Y component gain
control.
Press ENTER and rotate SCROLL/ADJ. to vary.
0.0% – +200.0%.
Y Lift
Rotate the SCROLL/ADJ. control to show the Y component lift
control.
Press ENTER and rotate SCROLL/ADJ. to vary.
-10.0% – 10.0%.
U Gain
Rotate the SCROLL/ADJ. control to show the U component gain
control.
Press ENTER and rotate SCROLL/ADJ. to vary.
0.0% – +200.0%.
V Gain
Rotate the SCROLL/ADJ. control to show the V component gain
control.
Press ENTER and rotate SCROLL/ADJ. to vary.
0.0% – +200.0%.
Input mode
The SYNNER-E 3G has the option of either receiving an optical input or transmitting an
optical output once the necessary SPF optical module has been fitted. If the optical receiver
module is fitted the fibre optic I/O input select will allow the video input to be selected
between the input BNC and the optical input.
