Crystal Vision
Installation
Indigo 4 User Manual R1.7
29
09/08/2012
The address range is shown in the following table:
Device
Address in upper
frame
Address in lower
frame
Modules
1.01 to 1.12
2.01 to 2.12
Indigo PIC
1.00 2.00
Upper PSU
1.14
2.14
Lower PSU
1.15 2.15
The Indigo PIC '1.00' and '2.00' modules will display the air temperature, in degrees
centigrade, inside the frame above slots 1.05 and 2.05 where the temperature sensors are
located.
Node numbers
Whilst most Crystal Vision cards have their unique card location address assigned
automatically, older cards and frames use a ‘node’ switch on each card.
In all of the current frames, this node switch should be set to zero (factory default).
For compatibility reasons, the Home menu for each module may display the module's
node number (one less than its location or slot number).
Please refer to the Appendix to find out how node numbers relate to slot numbers in
particular frames and frame combinations.
Further details of control panel operation can be found in the Indigo Control Panel
User manual and details of module operation can be found in the documentation
supplied with each module.
