Crystal Vision
Installation
Indigo 4 User Manual R1.7
27
09/08/2012
Configuring PSUs
If a power supply is not fitted in the PSU 3 slot, the position of the slide switch on the top
right of the lower front panel PCB must be set to one.
Indigo 4 front panel hardware settings – PSU configuration
If both power supplies are fitted the slide switch is set to position two. If the switch is set
to one and there are two power supplies fitted, the LOWER PSU LED will flash from
GREEN to OFF every two to three seconds to warn that the switch is set to one instead of
two.
