ADC104OperationalManualV3_2
Crystal Vision
Page
30
19/09/05
7 Specification
General
Dimensions
100mm x 266 mm module with DIN 41612 connector
Weight
220g
Power consumption
5.0 W
Inputs
Analogue Input
YUV and syncs or RGB and syncs 700mV into 75ohm. (Y and Green 1
volt with syncs)
External syncs input can be composite Black & Burst or 2 volt mixed H &
V syncs into 75ohm
Link on PCB selects 75ohm termination or high impedance with loop-
through (via PCB)
DIL switch selection of YUV/RGB, Setup levels and (ADC104F/N only)
Betacam chrominance levels
Auto or manual 625/525 line selection (jumper selectable)
+/- 2µs adjustment of picture position from syncs
+/- 100nS adjustment in approximately 9nS steps of timing of Y to UV
delay (ADC104F/N)
Outputs
SDI
4 x 270Mb/s serial digital to EBU Tech 3267-E and SMPTE-259M with
EDH (on some frames and rear modules only 2 or 3 SDI outputs are
available)
<500ps 1KHz jitter and <800ps broadband jitter from stable 300mV Black
and Burst reference or mixed sync reference.
Analogue performance
Luminance Frequency
Response:
+/- 0.1dB 0 to 5.75MHz (ADC104F/FK)
+/- 0.2dB 0 to 5.75MHz (ADC104N)
Chrominance
Frequency Response:
+/- 0.1dB 0 to 2.75MHz (ADC104F)
+/- 0.2dB 0 to 2.75MHz (ADC104N)