ADC104OperationalManualV3_2
Crystal Vision
Page
14
19/09/05
Selecting test patterns
The Test Pattern menu allows one of eight test patterns to be selected:
The test pattern menu
Description
Press F1 to toggle between test patterns On/Off
Then rotate the shaft encoder to select the desired full-
screen or split-screen pattern:-
SDI Test, Grey, EBU Bars, Frequency Sweep, 100%
Bars, Frame Markers, Multi-Frequency, Ramp, Black.
Note:
The Tpat menu is not available with ADC104N converter.
Using the status display
The status display provides the following information:
The status menu
Description
The ADC104 status display shows the presence of the
selected reference sync along with the video input
standard which may be 525L or 625L.
The input standard will only be auto-detected if Jumper
J2 is in the AUTO position – see the Installation
chapter for more information.
Note:
The status display is available with all ADC104 versions.