ADC104OperationalManualV3_2
Crystal Vision
Page
10
19/09/05
3 Using the active control panel
The Crystal Vision active control panel is available as an integral part of the FP2-LF front
door for the FR2AV 2U frame, the FR1AV frame, and the DTBAV desktop box or as a
remote panel. Only one control panel can be connected to any frame, although one panel
can control two frames.
DEVICE
F1
HOME
ENTER
CAL
F2
F3
F4
The Crystal Vision control panel
At power up, the two line 20-character screen will display ‘Crystal Vision’ followed by
the firmware version number for the control panel. If the control panel firmware has been
updated for Statesman control, Statesman Mode will be entered and the message, ‘Press
CAL to Exit’ will be displayed.
DEVICE
F1
HOME
ENTER
CAL
F2
F3
F4
Statesman mode is entered by default
To continue with active control panel operation or configuration, press the ‘CAL’ button
once. A second press of the ‘CAL’ button will return to Statesman control.
Each module in a frame is polled during control panel initialisation. Modules that have
completed their own initialisation will respond with a node address.
Please refer to the Installation chapter and the appropriate Frame manual for further
information on node addresses.