30
SERVICING
12:0
GENERAL CHECKS PRIOR TO ANY SERVICING
A COMPETENT PERSON WITH A CURRENT GAS SAFE APPROVAL MUST SERVICE THE APPLIANCE EVERY
YEAR
A GAS SOUNDNESS TEST BE CARRIED OUT PRIOR TO SERVICING
IT IS ALSO RECCOMENDED THAT THE OPERATION OF THE APPLIANCE CHECKED PRIOR TO ANY
SERVICING, AFTER THESE CHECKS ENSURE THE APPLIANCE IS COLD BEFORE ANY SERVICING BEGINS
12:1
General servicing
It is recommended that the ods and mica fil is replaced during any servicing, please ensure they have been purchased
before servicing begins
Lay a dustsheet in front of the fire
Remove 4 screws holding glass frame
Pull glass away at bottom corners and remove glass panel, inspect for damage and store in a safe place
Remove fuel pieces and inspect for damage or soot clean or replace as necessary
Remove stone chippings and store
Providing the mica fill replacement bag has been purchased if so vacuum the mica fill from the burner and ensure all
burner ports are cleaned
Vacuum around the top tray where any debris or dust has been left by the stone chippings
The top burner cover can now be removed by unscrewing the 6 screws holding it in place
With the top burner cover removed the batteries in the tesc remote control unit can be changed, only use alkaline
batteries of good quality see
11:0
The 3 screws holding the burner in place can now be removed and then lift away the burner from the right and slide
away
The gas supply can now be isolated and the 4 screws holding down the burner tray removed and the burner tray lifted
out carefully ensuring the fibre panels are not damaged, at this point the injector can be examined and cleaned and
replaced if necessary the gas valve can also be checked and replaced if necessary
With the burner removed the inspection cover on the rear of the fire can be unscrewed and any debris that have
accumulated can be removed, refit the panel ensuring a good fit and it is sealed
Vacuum the inside of the firebox before replacing the fire tray
Replace burner and the screws holding it down
Replace top burner cover and fuel using the instructions
Replace the glass panel and screw up the glass fixing frame
