19
Setting the Hour
Press and release the + or – button to change the hour to the correct hour
and press set to store and to move to setting the minute.
Repeat this for setting the minutes.
Setting the temperature display to Celsius or Fahrenheit
.
Press and release the + or - button to toggle between C and F .
When the display shows the desired symbol, press and release the “SET”
button to store.
As the important settings above have now been done. Press and hold (not
releasing straight away) the “SET” button for a few seconds and this will
exit the setup menu.(alternatively you can press and release the set button
several more times until the time of day is displayed on the handset.
The control is now ready for use with the Fire Control.
Note: the legend at the bottom shows the battery condition of both the
batteries in the hand set and in the fire control alternately. RC = Remote
Control handset and FC = Fire control. The control is designed to get the
most out of the batteries but when eventually the display shows they are
spent(when the battery legend is a empty area, we recommend you change
the batteries in the handset before they are flat, to avoid having to re-
program the time of day in again. N.B. Pairing is not lost, even if the
batteries are removed or flat. The pairing is not lost when the batteries are
flat but replacing them quickly before they have gone flat will avoid having
to set the time of day, day of the week etc again)
