16
LIGHTING THE APPLIANCE (USERS INSTRUCTIONS)
9:1
Fire Control
This control is situated on your fire. The drawing shows the main features of the control.
The control required 3 AA size alkaline batteries to be inserted under the battery compartment cover. The
orientation of these is shown molded into the battery compartment.
After fitting the batteries and replacing the cover the fire can now operate. Slide the slide switch to the right to the On
position (I symbol).
To start the fire, press the power button and hold for 1 second then release. The burner will within around 1 to
10
seconds, adjust to the maximum power setting,
The power of the burner can be adjusted up and down by pressing the – and + buttons.
To stop the fire, simply press the power button again and the burner will stop.
If you are not intending to use the fire for a long period ( i.e. over summer time months), the battery life can be
extended even more by sliding the white isolator switch to the left(away from the On position,
symbol 0
)
