![background image](http://html.mh-extra.com/html/crux/acpbm-77x/acpbm-77x_manual_2691564006.webp)
Crux Interfacing Solutions • 21541 Nordhoff Street, Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.072419
6 of 12
R
INTERFACING SOLUTIONS
ACPBM-77X
29. If your vehicle has a factory AUX
input, use the 3.5mm to RCA Adapter
included in the kit to connect sound to
the factory audio system.
28. Connect the audio out RCAs from
the Power/Video harness to the RCA
inputs that were installed earlier.
30. Mount the microphone to a
location of your choice.
31. Connect the 3.5mm microphone
jack to the MIC input on the Power/
Video harness.
32. Connect the white wire with the
4-pin connector from the Power/CAN
harness to the UART port on the Smart-
Play module.
33. Connect the Power/Video harness
to the POWER/VIDEO port on the
Smart-Play module.
36. Check the OSD settings and make
sure they match those on the next
page. Test the Back-Up camera. Put
gear in reverse and check for rear
camera image on screen. Go to Smart-
Play mode and test for functionality.
Once the cameras and Smart-Play
validation is complete, mount the
ACPBM-77X and Smart-Play modules.
And finally, reinstall all the components
to their original set-up.
34. Connect the USB extention cable
to the USB input on the Power/
Video harness for easier access when
connecting your smart-phone or USB.
35. Test the communication. Turn on
the ignition and check if LEDs are on.
Smart-Play Integration with Rear-View Camera Input for
E Series BMW with CCC Systems (6.5” or 8.8” Monitor) and 10-Pin LVDS Connector