![background image](http://html.mh-extra.com/html/crux/acpbm-77x/acpbm-77x_manual_2691564005.webp)
Crux Interfacing Solutions • 21541 Nordhoff Street, Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.072419
5 of 12
R
INTERFACING SOLUTIONS
ACPBM-77X
19. Tap the Black GND wire from the
Smart-Play Power/Video harness to the
black Ground wire on the ACPBM-77X
vehicle harness (Male Side).
20. Tap the Yellow constant wire from
the Smart-Play Power/Video harness to
the Red constant wire on the ACPBM-
77X vehicle harness (Male Side).
21. Connect the male 8-pin connector
from the ACPBM-77X to the female
8-pin connector on the Power/CAN
harness.
22. Tap the RED ACC wire from the
Smart-Play Power/Video harness to the
green +12V output on the ACPBM-77X
harness.
23. Plug in the female side of the
ACPBM-77X harness to the Headunit.
24. Plug the Video Out from the Smart-
Play Power/Video harness into the
FRONT CAM input on the module.
26. If installing an aftermarket back-up
camera, plug the camera’s video out
to the REAR CAM input on ACPBM-77X
module. Use the PINK power output 1
wire provided on the Power/CAN har
-
ness to power the camera. An image
is displayed in step 26. If retaining an
OEM camera or if you’re not installing
a back-up camera, skip steps 25 and 26.
25. Plug in the Power/CAN harness to
the ACPBM-77X module.
27. Connect the camera power wires to
the PINK power output 1 wire.
Smart-Play Integration with Rear-View Camera Input for
E Series BMW with CCC Systems (6.5” or 8.8” Monitor) and 10-Pin LVDS Connector