CrustBuster BeltVeyor Crescent, Owner'S Manual

Page: 5 / 48

3
8. Make sure all safety devices, shields, and guards are in place and are
functional before beginning the operation.
9. Shut off power to adjust, service, or clean the BeltVeyor.
10. Keep hands, feet, and clothing away from moving parts. It is a good idea to
remove all jewelry before starting the operation.
11. Visually inspect the BeltVeyor periodically during operation for signs of
excessive vibration, loose fasteners, and unusual noises.
Electric Safety
1. Electric motors and controls should be wired by a qualified electrician and
meet all standards set by Federal, State, and Local Electrical Codes.
2. Make certain electric motors are grounded.
3. A magnetic starter should be used to protect your motor.
4. Your motor must have a manual reset button.
5. Electrical power must be disconnected before resetting your motor.
6. A main power disconnect switch, with the ability to be locked in the off
position, should be provided. The switch should be locked in the off position
whenever work is to be done on the BeltVeyor or the BeltVeyor is going to
be left unattended.
7. Disconnect power before resetting motor overload.
CAUTION
1. Read and understand instruction manual before operating.
2. Keep all safety shields and devices in place.
3. Make certain everyone is clear before operating machine.
4. Keep hands, feet, and clothing away from moving parts.
5. Shut off power to adjust, service, or clean.
6. Make sure machine is secured before operating.
7. Disconnect power before resetting motor overload.
8. Make certain electric motors are grounded.