CrustBuster BeltVeyor Crescent, Owner'S Manual

Page: 21 / 48

19
20' BeltVeyor
20'-16" Honeycomb
Belt
20'-16" Crescent Belt All bu/hr was done with 60 lb/bu wheat
@ 12%-15% moisture
ft/min angle bu/hr hp ft/min angle bu/hr hp
389 30 3000 4.4 389 27 2700 4.0 Undercarriage - sliding
389 35 2750 4.6
389 40 2500 4.8 Available drives - Electric
Hydraulic
474 30 3574 4.8 474 27 3050 4.8
474 35 3276 5.0 Electric - 7.5 hp minimum
474 40 2979 5.2 Use 3 phase @1800 RPM
576 30 4264 5.4 576 27 3410 5.0 Hydraulic - minimum 10 gpm @2000 psi from source
576 35 3908 5.6 minimum 8 gpm @2500 psi from source
576 40 3553 5.8 do not exceed 2750 psi and 20 gpm
728 30 5291 6.2 728 27 3800 5.7 Drive Type - Head drive jack-shaft style
728 35 4850 6.4
728 40 4409 6.7 Belt - 16" Honeycomb cleat
16" crescent
833 30 6000 6.7 833 27 3950 6.0 Maximum angle -
833 35 5500 7.0 Crescent 27 degrees
833 40 5000 7.3 Honeycomb 40 plus degrees
Operations above recommended angle WILL result in damage to unit.