background image

13

English

to premature wear and failure of the appliance parts, 

therefore, in case of contaminated water ingress, turn 

off the appliance and check its alignment relative to the 

bottom of a reservoir or a well�

 

The appliance can work continuously for no more 

than 2 hours, after which it must be turned off for 20 

minutes� The appliance should be used for no more 

than 12 hours a day�

Appliance maintenance / preventive 

measures

Before  any  procedures  remove  the  power  cable 

from the socket.
Cleaning the appliance (see fig. 10)

If the appliance becomes dirty during use (for example, 

immersion in silt, pumping out dirty water, etc�), it must 

be cleaned�

 

Unscrew the screws 

15

, remove the base 

14

 and the 

grid 

1

 (see fig. 10.1).

 

Unscrew the screws 

18

, remove the cap 

17

 (see 

fig. 10.2).

 

Thoroughly wash the grid 

1

 and impeller 

16

 

Reassemble in reverse order�

Long-term storage

Attention! If any water remains in the appliance, it 

will freeze at the temperatures below 0°C and dam

-

age the appliance, in such a case your right for a 

warranty repair becomes void.

Do not let water freeze in the appliance� Before long-

term storage in cold weather, always disconnect the 

hose 

10

 and drain the water from the appliance�

After-sales service and application service

Our after-sales service responds to your questions 

concerning maintenance and repair of your product as 

well as spare parts� Information about service centers, 

parts diagrams and information about spare parts can 

also be found under:

 www.crown-tools.com

.

Transportation of the appliances

 

Do not use hose or power cable to drag the appli-

ance�

 

Categorically not to drop any mechanical impact on 

the packaging during transport�

 

When unloading / loading is not allowed to use any 

kind of technology that works on the principle of clamp-

ing packaging�

Environmental protection

Recycle raw materials instead of dispos

-

ing as waste.

Appliance, accessories and packaging 

should be sorted for environment-friendly 

recycling�

The plastic components are labelled for categorized 

recycling�

These instructions are printed on recycled paper man-

ufactured without chlorine�

The manufacturer reserves the possibility to introduce changes.

Summary of Contents for 426543

















































Reviews: