background image

20 

Warranty 

CROW LIMITED WARRANTY 

(Crow)  warrants  this  product  to  be  free  from  defects  in  materials  and 
workmanship  under  normal  use  and  service  for  a  period  of  one  year 
from the last day of the week and year whose numbers are printed on 
the printed circuit board inside his product. 
Crow’s obligation is limited to repairing or replacing this product, at its 
option,  free  of  charge  for  materials  or  labor,  if  it  is  proved  to  be 
defective in materials  or  workmanship  under  normal  use  and  service. 
Crow shall have no obligation under this Limited Warranty or otherwise 
if  the  product  is  altered  or  improperly  repaired  or  serviced  by  anyone 
other then Crow. 
There  are  no  warranties,  expressed  or  implied,  of  merchantability  or 
fitness for a particular purpose or otherwise, which extend beyond the 
description  on  the  face  hereof.  In  no  case  shall  Crow  be  liable  to 
anyone for any consequential or incidental damages for breach of this 
or any other warranty, expressed or implied, or upon any other basis of 
liability  whatsoever,  even  if  the  loss  or  damage  is  caused  by  Crow’s 
own negligence or fault. 
Crow does not represent that this product can not be compromised or 
circumvented;  that  this  product  will  prevent  any  person  injury  or 
property loss or damage by burglary, robbery, fire or otherwise; or that 
this  product  will  in  all  cases  provide  adequate  warning  or  protection. 
Purchaser  understands  that  a  properly  installed  and  maintained 
product  can  only  reduce  the  risk  of  burglary,  robbery  or  other  events 
occurring  without  providing  an  alarm,  but  it  is  not  insurance  or  a 
guarantee  that  such  will  not  occur  or  that  there  will  be  no  personal 
injury or property loss or damage as a result. Consequently, Crow shall 
have no liability for any personal injury, property damage or any other 
loss  based  on  claim  that  this  product  failed  to  give  any  warning. 
However,  if  Crow  is  held  liable,  whether  directly  or  indirectly,  for  any 
loss  or  damage  arising  under  this  limited  warranty  or  otherwise, 
regardless of cause or origin, Crow’s maximum liability shall not in any 
case  exceed  the  purchase  price  of  this  product, 

which  shall  be  the 

complete and exclusive remedy against Crow. 

 

 

 

 

 

Summary of Contents for PowerWave-16























Reviews: