16
How to Delete User Code
In client mode, press <
PROGRAM
> and the
User number
(
2 to 50
) you intend to
delete, press <
ENTER
>. The code will be flashed back to you. Press <
BYPASS
> to
delete User code. Press <
ENTER
> to
save
the change.
Press <
PROG
> and <
ENTER
> exit program mode.
How to Add or Change Telephone Numbers
Your panel will accept up to 6 phone numbers with a total of 16 digits. Your panel can be
can be programmed to dial all or any of these depending on the event which has
occurred.
(The six phone numbers are at program address 331 through to 336).
While in
CLIENT
mode, key in the following sequence
<PROGRAM> <331> <ENTER>
(The address for telephone number 1), The existing number will be flashed out at the
Keypad then enter
<NEW TELEPHONE #> <ENTER>
The new numbers will be
flashed back to confirm acceptance.
At any time you can enter in the address for the telephone number just to view the
currently programmed value then press the
<PROGRAM>
button to move on to another
address.
Note
:
Address 331 = PH # 1, 332 = PH# 2 to 336 = PH# 6.
(Note: on the LED keypad “0” is indicated by LED “A” and “9” by LED “B”)
How to set Time and Date
The alarm system has an internal clock that may be used to automatically Arm or Disarm
the alarm or turn Outputs On or off. It is also used to identify when events occurred in
memory via the LCD keypad. Should you need to change the Time & Date it must be
done from
CLIENT
mode.
To change the Time & Date press
Press
<PROGRAM> <823> <ENTER> <1-7> <ENTER>
Where 1-7 = the current day (1=Sun, 2 = Mon to 7 = Sat)
Press
<PROGRAM> <824> <ENTER> <HHMM> <ENTER>
Where HH = Hour in 24 Hour Format and MM = Minutes
Press
<PROGRAM> <825> <ENTER> <1-31> <ENTER>
Where 1-31 = the current date
Press
<PROGRAM> <826> <ENTER> <1-12> <ENTER>
Where 1-12 = the current month
Press
<PROGRAM> <827> <ENTER> <YY> <ENTER>
Where YY = current year, e.g. 02=2002
