User Manual and Reference Handbook for the CC Pilot™ XL
CC Pilot™ XL
External interface description
Accessible on the rear of CC Pilot™ XL, there are a number of ports to connect various
peripheral equipments. In order to give the CC Pilot™ XL its high environmental
classification, the unit is equipped with DIN M12 connectors. CrossControl provides
adapter cables which convert from DIN M12 to standard connectors.
Use caution and avoid plugging/unplugging of connectors when the computer is on. If
the pins become bent or damaged they may not function correctly, or in the worst case,
the onboard computer or other equipment may be damaged.
The connector legend describes where the connectors are located on your unit. The
connectors available is dependent on the unit’s configuration, therefore connections
can be addressed which may not be available to your unit
Notice that the following connector descriptions are those which are located on the unit,
not those that the attached cables shall have in order to mate with them.
Position
Description
X1 Power
Supply
X2 Audio
X3 USB
1
X4 USB
2
X5 USB
3
X6 USB
4
X7 Ethernet
X8 Video
In
X9 CAN
2
X10 CAN
1
X11 COM
X12 VGA
out
X13 DMI
10
