Crivit 273721, Instructions For Use Manual

Page: 10 / 26

12 GB/IE
Disposal
Please dispose of packaging and the item in an
environmentally friendly, single-variety manner!
Dispose product through an approved waste
management company or through your muni-
cipality. Always follow the current applicable
regulations.
3-Year Warranty
The product was produced with great care and
under constant supervision. You receive a three-
year warranty for this product from the date of
purchase. Please retain your receipt.
The warranty applies only to material and
workmanship and does not apply to misuse or
improper handling. Your statutory rights, espe-
cially the warranty rights, are not affected by this
warranty.
With regard to complaints, please contact the
following service hotline or contact us by e-mail.
Our service employees will advise as to the
subsequent procedure as quickly as possible.
We will be personally available to discuss the
situation with you.
Any repairs under the warranty, statutory gua-
rantees or through goodwill do not extend the
warranty period. This also applies to replaced
and repaired parts.
Repairs after the warranty are subject to a
charge.
IAN: 273721
Service Great Britain
Tel.: 0871 5000 720
(£ 0.10/Min.)
E-Mail: deltasport@lidl.co.uk
Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: deltasport@lidl.ie
You can also find spare parts for your product at:
www.delta-sport.com, category Service - Lidl Spare Parts
Service
Inflating balls (fig. D)
Insert the adapter for balls into the large ope-
ning (8) on the pump head. Move the clamp
lever (4) upwards to hold the adapter in place.
Then insert the adapter into the ball.
Inflating inflatable articles (fig. E)
Open the valve of the item to be inflated. Insert
the appropriate adapter for inflatable articles
into the large opening (8) on the pump head.
Move the clamp lever (4) upwards to hold the
adapter in place. Then insert the adapter into the
valve of the item to be inflated.
Inflating tyres with Blitz valve
(fig. F)
Open the cap on the tyre valve. Place the small
opening (7) on the pump head onto the valve.
Move the clamp lever (4) upwards to secure the
adapter.
Inflating tyres with a Schrader
valve (fig. G)
Open the cap on the tyre valve. Place the large
opening (8) on the pump head onto the valve.
Move the clamp lever (4) upwards to secure the
adapter.
Inflating tyres with a Sclaverand
valve (fig. H)
Open the cap of the tyre valve. Remove the nut
on the valve. Place the small opening (7) on
the pump head onto the valve. Move the clamp
lever (4) upwards to secure the adapter.
Maintenance and storage
Do not submerge the article in water since this
will cause damage! Always store the article at
normal room temperature in a clean and dry
place.
Important! Clean only with a damp cloth and
then wipe dry. Apply a little oil to the moving
parts occasionally.