background image

 

PROGRAMMING 

 

ELECTRONIC PROGRAMMABLE OPTIONS 

To change the electronic options turn the ignition on, wait at least (1) second, and press the override/program button 5 
times.  You will hear one 2 second long confirmation chirp from the siren.  Within the next 5 seconds press the 
override/program button again the number of times that corresponds to the feature list below.  The siren will chirp once 
for each button press.  Press the #2 Unlock button on the transmitter to change the option from the default factory 
setting.  2 chirps will also be heard.  If the #1 Lock button is pressed, the option will change the option back to the 
original default setting and 1 siren chirp will sound. 

 

PROGRAMMING OPTIONS CHART 

 

Option #  Option Description 

Selection 

Fac. Pre-set 

Double Unlock Pulse 

ON or OFF. 

OFF 

Disarm with trunk pop 

ON or OFF 

OFF 

Lights on with disarm 

ON or OFF 

ON 

Active Carjack Enable 

ON or OFF 

OFF 

10/60 Sec. Door Open 
Warning 

Button #1 = 10 Sec. 
Button #2 = 60 Sec. 

10 Sec. 

Silent Arm/Disarm 

ON or OFF 

OFF 

Active Re-Arm 

ON or OFF 

ON 

Passive Carjack Enable  ON or OFF 

OFF 

 

OPTION DESCRIPTIONS (SEE CHART ABOVE) 

 

DOUBLE UNLOCK PULSE 

The unit will send 2 unlock pulses when the #2 Unlock button is pressed.  This feature may be required for interfacing 
this alarm with an existing Factory Keyless Entry or Alarm system in a vehicle.   These systems are found on some 
Nissan, VW, Toyota, and Lexus vehicles.  Factory Default setting is OFF 

 

DISARM WITH AUX. OUTPUT 1 

This feature controls whether the system will or will not disarm when the trunk pop or Aux. feature is used.  When the 
feature is turned on the unit will disarm upon pressing Button #3 (Trunk Pop).  Factory Default setting is OFF 

 

LIGHTS ON WITH DISARM 

Keeps parking lights on when system is disarmed to assist in locating your vehicle in a crowded parking lot or 
structure.  Light will stay on for 30 Sec. or until Ignition is turned on.  Factory Default setting is ON. 

 

CARJACK ENABLE 

Enables Active Carjack protection features.  Factory Default is OFF. 

 

Summary of Contents for Gargoyle CS-2001













Reviews: