Crestron TSW-570P Product Manual Download Page 199

Page: 199 / 226

Product Manual — Doc. 8550E

TSW-70 Series • 193

Display Edge: Select a radio button (Top, Bottom, Left, or Right) to select the position on
the touch screen where the virtual toolbar is displayed.

Auto Hide Timeout: Select a duration (in seconds) that must elapse before the virtual
toolbar is hidden automatically.

Click the + (plus) icon next to PinPoint Beacon to display the following Bluetooth beacon
settings.

Settings Tab - System Setup (PinPoint Beacon)

BT Enabled: Turn on the toggle to use the Bluetooth beacon.

BT Mode: Use the drop-down menu to select the mode (Advertise or Config) of the
Bluetooth beacon.

Select Advertise to make the Bluetooth beacon available to Crestron devices that
support this functionality.

Select Config to put the Bluetooth beacon into configuration mode.

Services

Click Services to configure Crestron Fusion® software settings.

Settings Tab - Services

NOTE:

If connecting to a Crestron Fusion software on-premises server, connections are made

using either traditional (outbound) or inbound communications. For more information, refer to
the

Crestron Fusion 10 On-Premises Software Getting Started Guide

Crestron Fusion Cloud: Turn on the toggle to allow a connection to a Crestron Fusion
Cloud server. This connection is only applicable when the scheduling mode is set to
Crestron Default or User Project.

Crestron Fusion Cloud URL: Enter the URL used to connect the touch screen to the desired
Crestron Fusion Cloud server.

Summary of Contents for TSW-570P



































































































































































































































Search results

Summary of Contents for TSW-570P

Reviews:

Brands by name

Popular brands

Crestron TSW-570P, Product Manual

Search results

Summary of Contents for TSW-570P

Reviews:

Brands by name

Popular brands