Crestron TSW-570P Product Manual Download Page 154

Page: 154 / 226

148 • TSW-70 Series

Product Manual — Doc. 8550E

Audio Setup

Tap Audio Setup on the Setup screen to display the Audio Setup screen.

Audio Setup Screen

Use the Audio Setup screen to control the master volume, media volume, and beep volume
settings for the touch screen.

NOTE:

The Media Volume controls adjust the H.264 streaming media level in relation to the

Volume controls.

Volume

Tap the up and down arrow buttons to raise or lower the touch screen master
volume incrementally from 0 to 100%.

Tap Mute On or Mute Off to mute or unmute the master volume.

Tap Test to play a test recording at the current volume level.

Media Volume

Tap the up and down arrow buttons to raise or lower the touch screen media volume
incrementally from 0 to 100%.

Tap Mute On or Mute Off to mute or unmute the media volume.

Beep Volume

Tap the up and down arrow buttons to raise or lower the touch screen beep volume
incrementally from 0 to 100%.

Tap Beep On or Beep Off to turn the beep volume on or off.

Tap < BACK to return to the Setup screen.

Summary of Contents for TSW-570P



































































































































































































































Search results

Summary of Contents for TSW-570P

Reviews:

Brands by name

Popular brands

Crestron TSW-570P, Product Manual

Search results

Summary of Contents for TSW-570P

Reviews:

Brands by name

Popular brands