Crestron TSW-570P Product Manual Download Page 189

Page: 189 / 226

Product Manual — Doc. 8550E

TSW-70 Series • 183

Room Scheduling

Click Room Scheduling to view the status of the room if using a room scheduling application.

Status Tab - Room Scheduling

The following Room Scheduling information is displayed:

Room Status: The status of the connected room (available or reserved)

Calendar Sync: The status of the sync between the touch screen and the room scheduling
calendar

Crestron Fusion Online Status: The status of the Crestron Fusion connection (if
applicable)

Display

Click Display to view the display status.

Status Tab - Display

The Display Status field indicates the display status (on, standby, or screensaver).

Summary of Contents for TSW-570P



































































































































































































































Search results

Summary of Contents for TSW-570P

Reviews:

Brands by name

Popular brands

Crestron TSW-570P, Product Manual

Search results

Summary of Contents for TSW-570P

Reviews:

Brands by name

Popular brands