Isys
®
9” Wall Mount Touch Screen
Crestron
TPMC-9L
Locating the TPMC-9L (Cresnet) in the Device Library
b. To incorporate the TPMC-9L (Ethernet) into the system, drag the
TPMC-9L from the Touchpanels | Touchpanels (Ethernet) folder of the
Device Library
and drop it in the
System Views.
Locating the TPMC-9L (Ethernet) in the Device Library
The system tree of the control system displays the device in the appropriate
slot(s) with a default Net ID or IP ID as shown in the following illustration.
Below the TPMC-9L in the illustration, the “TPMC-9L Buttons and
Gestures” extender is visible. The extender provides a set of signals that
allow programmers to quickly identify when a hard key is pressed or
released or when there is gesture input on the touch screen.
NOTE:
In the following illustration, there is both an Ethernet device in
Slot 8 and a Cresnet device in Slot 9. It is possible to have both types of
device attached to a control system as long as the control system has either
a built-in or expansion Ethernet interface. If Cresnet operation is desired,
the IP table for the TPMC-9L must be empty.
34
•
Isys
®
9” Wall Mount Touch Screen: TPMC-9L
Operations & Installation Guide – DOC. 7030B