Crestron
TPMC-9L
Isys
®
9” Wall Mount Touch Screen
Touch the
IP Address / Hostname
button. The on-screen keyboard opens, as shown
in the illustration below.
On-Screen Keyboard
Touch
CLEAR
to remove any previous entry. Then enter the address required.
Touch
OK
to accept the entry or
CANCEL
to cancel the entry. This hides the on-
screen keyboard and returns the display to the “Edit IP Table Entry” screen.
On the “Edit IP Table Entry” screen, touch
Save
to keep the change or
Cancel
to
cancel the change and return to the “Control System Interface” menu.
To edit the port,
CIP ID
or
Device ID
, touch the appropriate button. Touching the
Port (41794)
button opens the numeric keypad. Touching the
CIP ID
or
Device ID
buttons opens a hex keypad, shown in the illustration below.
Hex Keypad
Touch
CLEAR
to remove any previous entry. Then enter the ID required. Touch
OK
to accept the entry or
CANCEL
to cancel the entry. This hides the hex keypad
and returns the display to the “Edit IP Table Entry” screen.
From the “Control System Interface” menu, to edit or remove an IP entry, first touch
the appropriate button containing the entry. Then touch
Edit IP
or
Remove IP
as
appropriate. Editing an entry displays the “Edit IP Table Entry” screen (refer to
illustration on page 16). Removing an entry displays a message saying
Please
Operations & Installation Guide – DOC. 7030B
Isys
®
9” Wall Mount Touch Screen: TPMC-9L
•
17
