Crestron
Lighting
Control
System
PAC2 2-Series Automation Control System Specifications (continued)
SPECIFICATION DETAILS
Ethernet (Optional Z-BUS
cards)
Dynamic/Static IP Addressing
Full and Half Duplex TCP/IP and UDP/IP
Built-in Firewall for Security (Dual Port Only)
Built-in Network Address Translator (Dual Port
Only)
Built-in Web Server
Built-in Router –(Dual Port Only)
Ports/Connectors
NET
COMPUTER
I/O
RELAY OUTPUT
POWER
OVERRIDE
BACKUP NET INPUT
FAULT
LEFT / RIGHT
33 – Cresnet 4-wire interface (32 on the built-in
hub/repeater, and 1 on the front panel)
(Expandable via Cresnet Poll Accelerator)
1 – DB9F PC interface
8 – Programmable digital/analog inputs & digital
outputs
8 – Normally open, isolated relays (MOV
suppression)
4 – Internal and External power
2 – External contact closure
1 – External 2-Series control system backup
1 – To external 2-Series control system for fault
indication
2 – Lighting module interface
Power Requirements
100-240 VAC, 2.4 A, 50/60 Hz
Internal Universal Power Supply
Network Power Fuse Rating
4 A, 250 V (1¼” x ¼” Slow Blow Fuse Series)
50 watts 24 VDC regulated maximum available
for Cresnet devices
Reset Buttons
HWR - Initiates system hardware reset
SWR – Program Restart / Program Bypass
Environmental Temperature
41° to 113°F (5° to 45°C)
Humidity
10% to 90% RH (non-condensing)
Dimensions & Weight
Height: 3.75 in (9.52 cm)
Width:
14.00 in (35.56 cm)
Depth:
7.40 in (18.80 cm)
Weight: 8.00 lb (3.60 kg)
Design Guide – DOC. 5999A
Lighting Control System Design
•
27
Summary of Contents for Lighting Control System
Page 1: ...Crestron Lighting Control System Design Guide ...
Page 4: ......
