Control System
Crestron
Lighting
The
CLX-4HSW4
switching module can switch four 16A lighting circuits as well as
½ HP (maximum) motors. Loads are switched on and off, but not dimmed. The
maximum load is four controlled circuits per module and 1920 watts (16A) per
controlled circuit (64A maximum total).
CLX-4HSW4 Module Specifications
Load Type
INC, MLV, NCC and non-dim
fluorescent, non-dim H.I.D.
Module Output
4 controlled circuits, 16A (1/2
HP) per controlled circuit, 64A
total
Heat Dissipation
42 BTU maximum
Terminal Block
CLT-4HSW4
Input Voltage
Four 120 VAC 60 Hz, single-
phase (same phase)
Size (H x W x D)
7 3/8 x 6 7/8 x 3
Temperature Range
32 – 104° F
Humidity Range
10 – 90% RH (non condensing)
Weight
3 lbs.
The
CLX-1MC4
controls up to four 10A (½ HP) maximum bi-directional motors.
High-voltage window treatment motor controls are assigned to CLX-1MC4. The
single input feed limits the total output of all eight controlled dimmer circuits to
1920 watts (16A).
CLX-1MC4 Module Specifications
Load Type
3-wire bi-directional motors
Module Output
4 controlled circuits,
10A (1/2 HP) per motor load (5A
each direction), 16A total
Heat Dissipation
22 BTU/Hr
Terminal Block
CLT-1MC4
Input Voltage
120 VAC 60 Hz,
single-phase
Size (H x W x D)
7 3/8 x 6 7/8 x 3
Temperature Range
32 – 104° F
Humidity Range
10 – 90% RH (non condensing)
Weight
3 lbs.
10
•
Lighting Control System Design
Design Guide – DOC. 5999A
Summary of Contents for Lighting Control System
Page 1: ...Crestron Lighting Control System Design Guide ...
Page 4: ......
