Crestron Lighting Control System, Design Manual

Page: 28 / 44

Control System Crestron Lighting
Wiring Plan Details
Location Device Type Crestron Device
Room 1 DIM1 – Wall dimmer – 100 Watts CLW-DIM
Room 2 DIM4 – Wall dimmer – 150 Watts CLW-DIM
Room 2 DIM5 – Wall dimmer – 150 Watts CLW-DIMS
Room 2 SW1 – Wall Box switch – Low voltage/outdoor CLW-SW
Room 2 Touchpanel TPS-1000
Room 3 DIM2 – Wall dimmer – 100 Watts CLW-DIM
Room 3 DIM3 – Wall Dimmer – 100 Watts CLW-DIMS
Room 4 DIM6 – Wall dimmer – 200 Watts CLW-DIM
Room 5 DIM7 – Wall dimmer – 120 Watts CLW-DIM
Room 5 KP1 – Wall Keypad – Fan Motor Speed CLX-1FAN4
Step 6: Control Processor
The PAC2 has been specifically designed for the Crestron automation enclosure and
the Crestron lighting system, although other Crestron processors can also be used.
The PAC2 can be placed in its own enclosure for simplification of low-voltage
wiring. The PAC2 occupies one module space in single-width enclosures and two
module spaces in double-width enclosures.
24
•
Lighting Control System Design Design Guide – DOC. 5999A