Crestron Isys i/O TPMC-15-CH Operation Manual Download Page 69

Page: 69 / 80

Crestron Isys i/O

™

TPMC-15/17 Tilt Series

Touchpanel Media Centers

6. When the following screen appears, browse to locate the firmware (.csz)

file.

Locate Firmware in the “Open” Window

7. Click

Open

and the file transfers to the unit.

NOTE:

While performing firmware update, do not power off the device unless it is

unresponsive for an excessively long period of time (i.e. greater than 15-20 minutes).

“File Transfer” Window

8. The “Firmware” window indicates the new firmware version. Click

Close

after the touchpanel automatically reboots.

Operations Guide - DOC. 6344

Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17 Tilt Series

•

Summary of Contents for Isys i/O TPMC-15-CH

















































































Search results

Summary of Contents for Isys i/O TPMC-15-CH

Reviews:

Related manuals for Isys i/O TPMC-15-CH

Brands by name

Popular brands

Crestron Isys i/O TPMC-15-CH, Operation Manual

Search results

Summary of Contents for Isys i/O TPMC-15-CH

Reviews:

Related manuals for Isys i/O TPMC-15-CH

Brands by name

Popular brands