Crestron
FT-PWR-B & FT-PWR-BALUM
FlipTop Power Center
Mounting Brackets Installed
7.210 in
(18.31 cm)
TWO MOUNTING BRACKETS
FOUR #10-32 2"L
SCREWS
EIGHT #6-32 3/16"L
SCREWS
Hardware Hookup
Hookup consists of simply plugging the line cord into an appropriate outlet.
NOTE:
To prevent overheating, do not operate this product in an area that exceeds
the environmental temperature range listed in the specifications table. Consideration
must be given if installed inside a closed desk or in a closed podium since the
operating ambient temperature of these environments may be greater than the room
ambient. Contact with thermal insulating materials should be avoided on all sides of
the unit.
NOTE:
The maximum continuous current from equipment under any external load
conditions shall not exceed a current limit that is suitable for the minimum wire
gauge used in interconnecting cables. The ratings on the connecting unit's supply
input should be considered to prevent overloading the wiring.
Operations & Installation Guide – DOC. 6480
FlipTop Power Center: FT-PWR-B & FT-PWR-BALUM
•
11
