Crestron DigitalMedia 8G+ DM-RMC-100-C, Operations & Installation Manual

Page: 7 / 40

Crestron
DM-RMC-100-C
DigitalMedia 8G+ Receiver 100
Operations & Installation Guide – DOC. 7000C DigitalMedia 8G+ Receiver 100: DM-RMC-100-C

1

DigitalMedia 8G+™ receiver and display controller

DM 8G+ input supports up to 330 foot (100 meter) cable length
1

Connects to a DM
®
switcher or transmitter (each sold separately) over one
CAT5e or Crestron DM 8G cable
1

Supports HDBaseT Alliance specifications

Provides one HDMI or DVI display output
2

Handles HD video with Deep Color, 3D, and HDCP

Handles Dolby
®
TrueHD, DTS-HD Master Audio™, and uncompressed
7.1 linear PCM audio

Provides a 10BASE-T/100BASE-TX Ethernet connection

Enables device control via CEC, IR, RS-232, and Ethernet
DigitalMedia 8G+ Receiver
& Room Controller 100:
DM-RMC-100-C
Introduction
The DM-RMC-100-C provides a simple one-box interface solution for a single
display device as part of a complete Crestron
®
DigitalMedia™ system. It functions
as a DM 8G+™ receiver and control interface, providing a single HDMI
®
output
along with Ethernet, RS-232, and IR control ports. In addition to DM 8G+, it is also
compatible with HDBaseT™ specifications, allowing it to be connected directly to
any HDBaseT compliant source. Its compact low-profile design allows the
DM-RMC-100-C to be installed discreetly behind a flat panel display or above a
ceiling mounted projector. It connects to the head end or source location using a
single CAT5e or Crestron DM 8G
®
cable.
1
Features and Functions
(Continued on following page)
1. For DM 8G+ wiring, use Crestron DM-CBL-8G DigitalMedia 8G™ cable, Crestron DM-CBL
DigitalMedia cable, Crestron DM-CBL-D DigitalMedia D cable, or generic CAT5e (or better) UTP or
STP. Maximum wire length for DM 8G+ is 330 feet (100 meters) between devices. Shielded cable
and connectors are recommended to safeguard against unpredictable environmental electrical noise
which may impact performance at resolutions above 1080p. Refer to the latest version of the Crestron
DigitalMedia Design Guide (Doc. 4546) for complete system design guidelines. It is available from
the Crestron Web site at
www.crestron.com/dmresources . DM 8G+ is also compatible with HDBaseT
Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables sold
separately.
2. HDMI requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI
interface cable sold separately.